“Panterra” Type Maschio Rotary Cultivators are designed for use on medium sized agricultural tractors from 160 to 330hp and are typically used for horticultural and agricultural work.
Main Features
•
•
•
•
•
Cat III
21 Spline PTO Shaft With Cam Clutch
1000 rpm Gearbox Gives 258 rpm rotor speeds (420-470)
1000 rpm Gearbox Gives 259 & 300 rpm rotor speeds (520-570)
Gearbox Oil Cooled With Radiator
Side Gear Drive Immersed In Oil
•
•
•
•
•
6 Blades Per Flange
Central Ridge Erradicator
Bonnet Spring Adjusters
Hydraulically Adjusted Cage Roller or Packer Roller for Depth Control
Rear Levelling Bar With Mechanical Adjusters
Pantera
Rear Roller
Pantera Hydraulic Folding - Rotary Cultivator - Features
Models 420-470 have a single speed PTO gearbox running at 1000 rpm giving a rotor rpm of 258. Models 520-570 have a Multi speed PTO gearbox with oil cooler running at 1000 rpm giving a rotor rpm of 259 or 300.
The Panterra come as standard with CAT III three point hitches, they can either be set to work as swinging to allow the machine to follow the contours on undulating ground or rigid by buy using the locking pin.
The new Duo-cone sealing system guarantees reliability without the need for maintenance. You can achieve at least 50% longer life from the Duo-cone system when compared standard systems in the most demanding working environments.
The sealing system is completely waterproof or “amphibious” allowing the rotor and bearing to run in its own oil supply, this allows the rotor to work and be reliable in the most dustiest environments or even work immersed in water and yet the seals will still prevent water and dust ingress into the rotor and hubs.
The rotor is supported by SKF barrel roller bearings, each bearing has a double rail consisting of two rows of spherical or barrel bearings to cope with heavy workloads.
Main Advantages:
Long Life (Up to 30% longer life than traditional taper roller bearings)
High Load Capacity (Multi axial shock resistance)
Easy Maintenance ( One of Maschio's main philosophies)
The levelling bonnet comes as standard complete with a sprung mechanical rod that puts constant downward pressure on the bonnet and acts as a shock absorber protecting the bonnet from damage, whist working in stony conditions.
The Pantera uses four hydraulic rams to fold to 2.49m for safe road transportation, It also incorporates an automatic transport lock so there is no need for the driver to leave the tractor cab to unfold.
Works well on medium soil types and in low moisture conditions creating a good seed bed.
Packer Roller - Ø500mm
The toothed Packer Roller works well breaking up any surface clods further and at the same leaving an excellent finish, ready for seeding. This roller also comes standard with tungsten coated scrapers.
Rear Roller Bearing
The long life oversized rear roller support consists of a bearing and roller support all in one unit and is manufactured this way so it has the strength to support the weight of the Rotary Cultivator.
The bearing and support has a relatively new greasing system that is situated in a protected section of the roller frame preventing damage from debris.
Tungsten Soil Scrapers
The scrapers are 4mm thick and are tungsten coated as standard, they are attached with a single bolt and guide for quick adjustment.
Pantera
Pantera Hydraulic Folding - Rotary Cultivator - Model
Models
Pantera Hydraulic Folding - Standard Equipment
420
MODEL 420-470
Gearbox with 1000 rpm PTO
Rotor revolution (rpm): 258
MODEL 520-570
Gearbox with 1000 rpm PTO Rear PTO
Rotor revolution (rpm): 259-300
Gearbox oil cooler with radiator system
ALL MODELS
PTO shaft with cam clutch (1" 3/8 6 spline tractor side yoke)
Direct side PTO shafts
Side gear drive in oil bath
Universal three point hitch cat. III
Swinging/rigde front hitches
Double rear bonnet
Bonnet spring adjusters
Hydraulic rear roller adjusters
Rear lights for transport
6 blades per flange with double flange
(side blades are always mounted inwards)
Central erradictors
Folding Width: 2.49m
4 hydraulic rams for folding
«CE» safety guards
To download the 2012 MASCHIO product price list click the image above
To download and view our Product Price List you will need the free Adobe Reader
If you don't already have this Click Here to download the Adobe Reader
Blades
Blade Options
Blade options
COBRA Blade
CONDOR Blade
Especially designed to work in very hard dry conditions, the Cobra rotor has a high number of vertical blades enabling it to cut in to the hardest soil with ease and creating an extremely fine seedbed.
Especially designed for soils with high concentration of stones, due to the blade placement and its high strength with a knife edge, this prevents stones from being carried round the rotor as they easily pass through the staggered spacing.
The OPICO logo is a registered trademark of OPICO Limited, all other trademarks are the property of their respective owners.
For full terms and conditions of use Click Here.
INTRODUCTION
Gearbox
PTO Shaft
Side Gear Drive
Linkage Mounting
CE Safety Guards
Sealing System
Levelling Bonnet
Blades
Adjustable Side Skids
Rear Roller Adjuster
Rear Transport Lights
Hydraulic Folding
Central Erradicator
