The Tigre Flail Mower is a heavy duty model, designed for use on small to medium sized agricultural tractors from 55 to 100hp and is typically used for amenity and agricultural applications.
The Tigre Flail Mower is suitable for cutting grass, crop residues, cornstalks and shredding branches or twigs.
It comes as standard with, mechanical offset, multiple toothed transmission belts (5) and height adjustable rear roller.
Main Features
•
•
•
•
•
Cat II
Mechanical Offset
6 Spline PTO
Single Speed 1000 rpm Gearbox With Freewheel
Transmission Belts With External Adjustment
The Tigre Flail Mower utilises 5 toothed transmission drive belts to transfer power to the rotor, the toothed drive belts allow slip proof engagement preventing power from the transmission being reduced due to heavy loads or general wear.
The Tigre Flail Mower comes standard with hammer flails and as an option with fish tail flails, the self sharpening hammer flail leaves a clean and level cut and lifts and mulches while cutting, whereas the fish tail flail is used for cutting dense tougher material. The hammers and blades bolt onto an electronically balanced rotor that minimises machine vibration and stresses on the bearings.
The Tigre Flail Mower comes as standard with double counter blades, an internal lower toothed counter blade and one upper counter blade that ensure that the discharged material is mulched into fine pieces. The upper counter blade enables the Tigre to produce a finer mulch of harder coarser materials.
The Tigre Fail Mower has a external rear roller position which unloads material in front of the self cleaning roller, the roller scraper can be manually adjusted if required to suit different working conditions, it presses down the crop residue speeding up break down.
The Tigre Flail Mower comes as standard with mechanical offset, it utilises a pin system to allow the 3 point linkage frame to slide along a front bar to select the offset in either a left or right direction.
The double skin frame re-enforces the main structure of the machine and also protects the external skin from wear and damage from debris inside the flail mower during work.
The Tigre Flail Mower uses barrel roller bearings, each bearing has a double rail consisting of two rows of spherical or barrel bearings to cope with heavy workloads. All bearings used in Maschio Flail Mowers are produced by SKF.
Main Advantages:
Long Life (Up to 30% longer life than traditional taper roller bearings)
High Load Capacity (shock resistance)
Easy Maintenance (One of Maschio's main philosophies)
The rear bonnet can be easily opened for flail and rotor inspection, this greatly improves the operator’s safety as most maintenance can be carried out with the Flail Mower on the ground.
The OPICO logo is a registered trademark of OPICO Limited, all other trademarks are the property of their respective owners.
For full terms and conditions of use Click Here.
INTRODUCTION
PTO Gearbox
Linkage Mounting
Transmission Belt
Long Life Bearings
Rear Opening Bonnet
