Gemella - Folding Flail Mower

Click one of the feature numbers below.

PTO Gearbox

The Gemella uses a self contained over-run gearbox with an input speed of 1000rpm, the over-run function prevents heavy load from being applied to the flail mower transmission when the tractor PTO is switched off.


Back to features image

Linkage Mounting

The Gemella uses dual category II and III three point hitches to connect to the tractor, the dual hitch consists of two holes and pins on each attaching bracket, one CAT II and one CAT III.


Back to features image

External Transmission Belt Adjustable

The Gemella Flail Mower utilises 5 toothed transmission drive belts per unit to transfer power to the rotor, the toothed drive belts allow slip proof engagement preventing power from the transmission being reduced due to heavy loads or general wear.


Back to features image

Blades And Hammer Kits

The Gemella Flail Mower comes standard with hammer flails and as an option with fish tail flails, the self sharpening hammer flail leaves a clean and level cut and it lifts and mulches while cutting, where as the fish tail flail is used for cutting dense tougher material. The hammers and blades bolt onto an electronically balanced rotor that minimises machine vibration and stresses on the bearings.  


Back to features image

Counter Blade

The Gemella Flail Mower has an internal lower counter blade that ensures that the discharged material is mulched into fine pieces. Fish tail flails are optional.


Back to features image

Ajustable Rear Roller

Height adjustment is controlled by the external rear roller on the Gemella Fail Mower. Wheels available as an option.


Back to features image

Front Safety Flaps

Steel front safety flaps allow material to enter the cutting chamber but prevent pieces from being thrown out at high speed.


Back to features image

Transport Width & Safety Locks

The Gemella Flail Mower has a transport widthof 2.4m with hydraulic safety locks for easy safe transport.


Back to features image

Rotor Layout

Helical type rotor with spiral effect flail mounting points on the rotor gives a more even rotation and reduces vibration and power requirement from the tractor.


Back to features image

Transport Lights

The Gemella Flail Mower comes with transport lights as standard.


Back to features image

Rear Opening Bonnet For Maintenance

The rear bonnet can easily be opened for flail and rotor inspection, this greatly improves the operator’s safety as most maintenance can be carried out with the Flail Mower on the ground.


Back to features image

Floating System

The floating link allows the Gemella to continuously cut more at a constant length on undulating ground and banks giving the Gemella Flail Mower 3 degrees upward movement on each wing. The floating function can be deactivated by simply moving the locking pin from position A to position B.


Back to features image

Long Life Bearings

The Gemella Flail Mower uses barrel roller bearings, each bearing has a double rail consisting of two rows of spherical or barrel bearings to cope with heavy workloads. All bearings used in Maschio Flail Mowers are produced by SKF.
Main Advantages:

Long Life (Up to 30% longer life than traditional taper roller bearings)

High Load Capacity (shock resistance)

Easy Maintenance (One of Maschio's main philosophies)


Back to features image