The Bisonte Flail Mower is one of the heavy duty models, designed for use on small to medium sized agricultural tractors from 50 to 110hp and is typically used for agricultural and forestry applications.
The Bisonte Flail Mower is suitable for cutting grass, crop residues, cornstalks and shredding branches or twigs. It can be used as a front or rear mounted machine.
Main Features
•
•
•
•
•
•
Double front/rear Cat II 3 point hitches
Hydraulic Offset
21 Spline PTO
Single Speed 1000 rpm Gearbox With Freewheel
Transmission Belts With External Adjustment
Hammer Flails
•
•
•
•
•
•
Double Counter Blade
Front Chain And Rubber Guard
Height Adjustable Rear Roller
Front Or Rear Mounted
Pair Of Side Skids
Double Skin Frame
The Bisonte uses a self contained gearbox with an input speed of 1000rpm, the gearbox cab be rotated through 180˚, allowing the Bisonte to be used as a front or rear mounted flail mower.
The Bisonte Flail Mower is supplied as standard with category II three point hitches to connect to the tractor. The Bisonte has a second category II three point hitch that allows it to be either a front or rear mounted machine.
The Bisonte Flail Mower utilises 5 toothed transmission drive belts to transfer power to the rotor, the toothed drive belts allow slip proof engagement preventing power from the transmission being reduced due to heavy loads or general wear.
The Bisonte Flail Mower comes standard with hammer flails and as an option with fish tail flails, the self sharpening hammer flail leaves a clean and level cut and lifts and mulches while cutting, whereas the fish tail flail is used for cutting dense tougher material. The hammers and blades bolt onto an electronically balanced rotor that minimises machine vibration and stresses on the bearings.
The Bisonte Flail Mower comes as standard with double counter blades, an internal lower toothed counter blade and one upper counter blade that ensure that the discharged material is mulched into fine pieces. The upper counter blade enables the Bisonte to produce a finer mulch of harder coarser materials.
The Bisonte Flail Mower has a external rear roller position which unloads material in front of the self cleaning roller, the roller scraper can be manually adjusted if required to suit different working conditions, it presses down the crop residue speeding up break down.
The Bisonte Flail Mower comes as standard with hydraulically adjusted offset. It utilises a hydraulic system to allow the 3 point linkage frame to slide along a front bar to selecting the offset in either a left or right direction.
The Bisonte Flail Mower uses barrel roller bearings, each bearing has a double rail consisting of two rows of spherical or barrel bearings to cope with heavy workloads. All bearings used in Maschio Flail Mowers are produced by SKF.
Main Advantages:
Long Life (Up to 30% longer life than traditional taper roller bearings)
High Load Capacity (shock resistance)
Easy Maintenance (One of Maschio's main philosophies)
The double skin frame re-enforces the main structure of the machine and also protects the external skin from wear and damage from debris inside the flail mower during work.
Dual position roller
Cat. II three point hitch
Double front/rear three point hitch
Gearbox PTO 1000 rpm with PTO and free-wheel
Protective Front Chains
Front PVC protection
Transmission belts with external adjustment
Double counter-blade
Pair of skids
Electronically balanced rotor
Hammer kit “14”
Roller Unit
«CE» safety guards
250
280
300
Bisonte Flail Mower
Bisonte - Heavy Duty Flail Mower - Technical
Models
HP
Working Width m
Total Width m
Machine Offset
cm <--> cm
No. of Hammers
Weight kg
PTO/RPM
220
50-110
2.26
2.49
113<-->113
73<-->153
20
877
1000
250
80-110
2.57
2.8
129<-->128
89<-->168
20
939
1000
280
90-110
2.76
2.99
138<-->138
98<-->178
24
999
1000
300
100-110
2.98
3.21
149<-->149
109<-->189
24
1055
1000
Downloads
Bisonte Heavy Duty Flail Mower - Downloads
Downloads
You can download booklets, brochures, parts and operators manuals for this and any of our products from our Download Centre.
Media Gallery
Bisonte Heavy Duty Flail Mower - Media Gallery
Working images and videos of the BISONTE FLAIL MOWER are coming soon.
Testimonials
Bisonte Heavy Duty Flail Mower - Customer Testimonials
Please visit our News pages for BISONTE FLAIL MOWER user stories and articles.
Optional Extras
Bisonte Heavy Duty Flail Mower - Optional Extras
OPTIONAL EXTRAS
Model No.
Description
Price reduction for gearbox PTO 540 rpm
Price surcharge for front/rear gearbox 1000 rpm PTO (with shaft at each end)
Pricing
Bisonte Heavy Duty Flail Mower - Pricing
Maschio 2012 Product Price List
To download the 2012 MASCHIO product price list click the image above
To download and view our Product Price List you will need the free Adobe Reader
If you don't already have this Click Here to download the Adobe Reader
The OPICO logo is a registered trademark of OPICO Limited, all other trademarks are the property of their respective owners.
For full terms and conditions of use Click Here.
INTRODUCTION
PTO Gearbox
Linkage Mounting
Tramsmission Belt
Long Life Bearings
Double Skin Frame
