ELHO Silo-matic 1420 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Trailed models 1410 standard or automatic have a rigid frame and strong lift arm that is designed for heavy use to enable the operator to transport a bale whilst wrapping another. The powerful hydraulic lift cylinder can handle heavy bales of wet silage and the offset position of the wrapping table ensures excellent stability and a low overall weight. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The wrapper is controlled from the cab, either by cable controls with 'hands free' function or with fully automatic electronic control. An infrared option is available for remote control when wrapping at the storage site. The electronic controller of the fully automatic Elho bale wrapper works with sensors and electro-hydraulics to control the whole wrapping process. Even the loading and unloading of bales can be programmed for maximum convenience. |
|
All functions can be controlled either manually with a joy stick or via switches. the wrapping table has two sensors, one for the loading position and one for the off loading position. Therefore, The controller can continuously monitor the table position and prevent damage from an interrupted wrapping cycle or incorrect manual operation. The large two row display is easily fine tuned if desired. The controller has a self diagnostic program to allow the operator to check valves, solenoid and sensors. The models equipped with an infra-red remote control have warning beacons to keep people aware when it is operating. |
|
|
|
|
|
|
|
On the manual machines the in-cab cable control levers have a lock position to allow hands free operation when wrapping and when using the cut and tie functions to improve ease of use. The electronic monitor on the cable controls makes wrapping more accurate and easier. The monitor indicates when the preset number of layers are reached and it also counts the number of bales per field. The monitor is battery powered, so it is independent from the tractor. |
|
| |
An additional braked third roller on the pre-stretcher follows the surface of the film roll preventing the roll from over running and keeps a constant stretch irrespective of the remaining amount of film left on the roll. |
|
|
|
|
|
|
|
|
|
To ensure the best grip on the film, the vertical movement of the cut and tie arm will first collect the wide film into a rope before it is clamped and cut off. The stretcher uses metal gears and sealed bearings to guarantee reliability. |
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTIONS |
|
|
|
|
|
|
|
|
|
|
|
|
|
- Belt & roller kit
- 2 x Tandem axles
- Counterweight 145kg
- Counterweight 70kg
- Hydraulic draw bar
- 360/55-12 tyres
- Bale turner
- Infra-red remote control
- Film break sensor
|
|
|
|
|
|
|
Click on link below! |
|
|
|
|
|
|
|
