Home    Search    Products    Contacts 600 Automatic Dryer Specification

12 ton approximate holding capacity 150 ton per 24 hour throughput
TAKE A LOOK AT SOME INSTALLATIONS

MODEL 600QF AUTOMATIC
Drying capacity	150 tonne in 24 hour
Bushel capacity	500
Height to top of auger with horizontal unloader	15'3" (4.165m)
Transport height with head removed	13'6" (4.1m)
Diameter of bin	11' (3.4m)
Grain wall thickness	18" (45.7 cm)
Vertical auger diameter	12" (30.5 cm)
Overall length	20'5" (6.2m)
Size of burner (Max BTU/hr)	3,900,000(1,143 kW)
Fan Size and Type (QF)	38" in-line centrifugal
Weight	5,940 lbs
Recirculating Time	12-15 mins
Loading auger size	8" (20.3 cm)
Loading rate	50 tonne/hr
Unloading rate	60 tonne/hr
Fan Drive	Belt
Fan Rating CFM and Outlet-Static Pressure	16,000 @ 1.5" (7.55m3/s @ 374 Pa)

	Supplied as standard with 38" custom-built in-line centrifugal fan (74 dba)
	Unique self-diagnostic electronic DCM control monitor
	Four electric motors
		15 hp for the centrifugal fan
		10 hp for the central auger and agitator
		5 hp for the loading auger
		2 hp for the unloading auger
	8" diameter loading auger with 9 ft loading hopper ( 50 ton an hour loading capicity)
	60 ton an hour 12" diameter central auger
	Centralised greaser location
	Epoxy powder coated outside sheets
	8 adjustable jacks
	Outlets for auxiliary loading and unloading motors
	Grain sampler, grain cleaner
	Grain pressure splitter pelmet LP Gar fired
Electric drive models require a 3-phase, 63 amp supply earth and neutral on a dedicated circuit via a residual current device and should be fitted by a qualified electrician.
Supply cable must not exceed 30 meters in length and be a minimum 10mm core.
Throughput per hour assumed 5% moisture reduction from 21% to 16%. Includes loading, heating, cooling and unloading time.
OPICO's policy is one of continuous improvement and the right to change prices, specifications or equipment at any time without prior notice is reserved.