|
|
 |
Supplied as standard with
33" custom-built in-line centrifugal fan (74 dba)
|
|
Unique self-diagnostic DCM
control panel
|
|
6" diameter loading auger
with 9 ft loading hopper (50 ton an hour loading capacity)
|
|
60 ton an hour 12" diameter
central auger
|
|
Centralised greaser location
|
|
Epoxy powder coated outside
sheets
|
|
Adjustable jacks, two new
tyres, grain cleaner, grain pressure splitter pelmet
|
|
Electric drive models require
a 3-phase, 63 amp supply. Supply line to include 3-phases,
earth and neutral on a dedicated circuit via a residual
current device and should be fitted by a qualified electrician.
|
|
Supplied cable must not exceed
30 mtrs in length, minimum 10mm core.
|
|
Throughput per hour assumed
5% moisture reduction from 21% to 16%. Includes loading,
heating, cooling and unloading time.
|
|
OPICO's policy is one of
continuous improvement and the right to change prices,
specifications or equipment at any time without prior
notice is reserved.
|
