 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Please go to our new site as these pages are no longer updated Click Here  |
|
||||||||||||||||
| ALL MODELS HAVE WIND UP SCREENS AND A WINCH-OVER DISCHARGE HEAD TO ENABLE FAST AND SIMPLE SET UP FROM TRANSPORT TO WORKING POSITION |  |
|
QUIET CENTRIFUGAL FANS PROVIDE 20,600 AND 32,375 CFM ON THE 1200QF AND 2000QF RESPECTIVELY THE PRESSURE ENSURES THAT THE AIR PRODUCED IS DRIVEN THROUGH EVEN THE DENSEST AND WETTEST CROPS |
 |
|
THE 368mm CENTRAL AUGER FLIGHTING IS MADE FROM 12mm STEEL AT THE INTAKE END TO PROLONG ITS LIFE IT HAS A DOUBLE SKINNED TUBE TO ALLOW A WORN INNER TUBE TO BE EASILY EXTRACTED AND REPLACED |
 |
|
THE ULTRA HEAVY DUTY "AUTO-STOP" AGITATOR MECHANISM ENSURES WET GRAIN CONTINUES TO FLOW IN THE DRYER WHEN LOADING AUGERS ARE ENGAGED THE DRIVE TO THE AGITATOR IS AUTOMATICALLY DISCONNECTED THIS UNIQUE FEATURE SPEEDS UP LOADING TIME - INCREASING OVERALL THROUGHPUT |
 |
| STAINLESS STEEL PERFORATED SCREENS ARE 1.5mm ON THE OUTSIDE AND 2.5mm ON THE INNER PLENUM GIVING MAXIMUM AIRFLOW WITHOUT COMPROMISE -PARTICULARLY IMPORTANT WHEN DRYING RAPE |
 |
|
SINGLE 10" (250mm) INTAKE AUGERS COME AS STANDARD ON THE 2000QF TO ENSURE LOADING TIME IS KEPT TO A MINIMUMTHE
|
|
| THE 1200QF COMES WITH A SINGLE 8" INTAKE AUGER CAPABLE OF 50tph LOADING CAPACITY |
|
| A HEAVY DUTY CONE AND DOG CLUTCH DRIVE WITH A CLEVER OVER-CENTRE DESIGN ENSURES MINIMUM HEIGHT FOR STORAGE AND TRANSPORT |
 |
|
ALL MAGNA DRYERS COME AS STANDARD WITH SINGLE DISCHARGE WHICH CAN BE FITTED TO EITHER SIDE. TWIN DISCHARGE CAN BE FITTED AS AN OPTION |
 |
| THE SPIRIT LEVELS ASSIST THE OPERATOR TO SET THE MACHINES LEVEL LONGITUDINALLY AND LATERALLY |
 |
| HEAVY DUTY BEVEL GEARBOX DRIVES THE 368mm MAIN AUGER. THE AUGER AND GEARBOX ASSEMBLY IS MOUNTED ON A 15mm BASE PLATE GIVING STRENGTH AND DURABILITY TO THE BOTTOM BIN |
 |
| GRAIN SAMPLER COMES AS STANDARD TO ENABLE OPERATOR TO SAMPLE AND TEST GRAIN DURING OPERATION |
 |
| THE BRICK MAKES THE DIFFERENCE - THE MULTI-TILED HEAT EXCHANGER RETAINS AND BUILDS UP HEAT TO GIVE EFFICIENT DRYING |
 |
|
|||||||||||||||||||||||||
|
| Home | Search | Products | OPICO Vacancies | Contact OPICO | Terms and Conditions of Use | Links of Interest |
|---|
The OPICO logo is a registered trademark of OPICO Limited, all other trademarks are the property of their respective owners. For full terms and conditions of use Click Here. © 2011 OPICO Limited |