 |
Liquid Gas Vaporiser and Ring Burner - Efficient Clean Drying
The gas is piped into the burner unit in liquid form and passes through a vaporising ring before being burnt in a ring burner, as liquid gas expands 100 times to become vapour this ensures high temperatures can be attained easily. As gas burns very cleanly, apart from long term servicing, little input is required by the operator. |
 |
Grain Guard Controller - Operator Guidance and self Diagnostics (395QF, 595QF, 600QF, 795QF, 800QF Models ONLY) More Info
Models with the Grain Guard fitted benefit from a menu system which guides the operator through setting his dryer up for a particular mode of operation and for specific crops with example temperatures preset into the controller. The Grain Guard also has a diagnostic function which controls the fail safes and will highlight the problem if there is one. |
 |
Push Button Controls - Simple operation (355XL, 555XL, 575QF Models ONLY)
The base models have simple push button and turn dial controls to allow the operator to quickly and easily set the dryer up for work, they also incorporate fail safes to prevent problems in the event of any mechanical failure. |
 |
Epoxy Coated Sheets - longevity
The outer screens on GT dryers are covered in an Epoxy coating to prevent corrosion and prolong the life of the dryer. |
 |
Custom Built Centrifugal Fan - Quiet for sensitive areas (QF Models ONLY)
QF Models use a large custom built centrifugal fan to create the airflow required to dry with, as the fan blades do not cut through the air aggressively this produces less noise resulting in a decibel rating of 74 and the ability to work 24 hours a day in noise sensitive areas. |
 |
Axial Fan - Simple low cost fan (XL Models ONLY)
XL Models use a propeller type bladed fan to provide the airflow for drying the grain, this is cost effective but has a decibel rating of 104 so it not suitable for noise sensitive areas. |