
Bush Hog TOUGH Just Got Tougher.
The 15ft flex wing set-aside grass cutter 2715 Legend set a new standard for flex wing set-aside cutter performace the first day on the job and for years to come. It's authenic Bush Hog. With 10 Bush Hog TOUGH Features.
BUSH HOG...Choose The Original.
Get everything that made Bush Hog flex wing set-aside grass cutters famous and a whole lot more.
Bush Hog is the number one rotary cutter manufacturer. Bush Hog flex wing set-aside grass cutters have been the best selling rotary cutters for more than 30 years. They mow more acres than any other rotary cutter brand. They are a legend in the industry. They set the standard for rotary cutters. Now the Bush Hog 2715Legend sets a new standard for 15ft flex wing set-aside grass cutters and for all rotary cutters. Now the TOUGH are TOUGHER.
Longest Limited Warranty in the Industry!
6 year gearbox limited warranty.
Bush Hog TOUGH Features Mean Better Performance.
10 Bush Hog TOUGH Features
1. TOUGH EZ Clean Double Deck.
The flex wing set-aside grass cutter deck sheds water and debris — decks total over 1⁄4-inch thick steel and are tied directly to strong backs. They are curved to shed water and debris and have drain holes for condensation.
2. TOUGH Between Deck Structure.
Absorbs shock for long grass cutter deck life—3/8-inch tie bars (A) connect hinge rails (B) and hydraulic cylinder base mounting lugs (C) into one structure. Hydraulic cylinder lugs (D) on wings are tied into gearbox stand (E) that extends from the side band (F) to the hinge rail (G) to form one single strong structure.
3. TOUGH Distribution Baffles.
Keep debris in each cutting circle to prevent windrows. Baffles are constructed of 7-gauge steel and attached with bolts for quick removal.
4. TOUGH Spring Steel Cushions.
Absorb shock loads. Cushions are strategically located at the axle where shock loads occur.
5. TOUGH Set-aside Grass Cutter Axles.
That can take bruising punishment. Axles are equipped with easy-to-reach grease fittings and use strong retaining bolt through the pivot pin.
6. TOUGH Set-aside Grass Cutter Wing Skids
Wing skids that last. Skids are built of 7-gauge steel, mounted on the outside of wings and turned up at 45 degree angle to reduce dig in on turns.
7. TOUGH Set-aside Grass Cutter Pivot Points
Are built to stand up to constant heavy loads. Pivot points are easy to grease
from the top, made of hardened steel, use replaceable bushings, feature Grade 5 steel pins, use 3/8-inch steel gussets.
8. TOUGH Long-Lasting Turnbuckles
Make adjustments easy now and for years to come. Turnbuckles are easy to reach for leveling adjustments and easy to grease for long life and easy turning.
9. TOUGH Grass Cutter Drivelines
Are built to last. Rugged driveline is designed for easy maintenance. Rear and front grease fitting align so they are easy and quick to service.
10. TOUGH Perma-Level® Hitch
Remains level on tractor drawbar. Bolt retainer adds additional strength to pivot pin.
The Bush Hog® TOUGH 2715Legend
Performance Features.......
- Three equal cutting circles for superior grass cutting and distribution
– Bush Hog Exclusive.
- High blade tip speed for cleaner cutting.
Large free wing float range reduces hydraulic cylinder rod travel for less wear.
- Built-in jack stand is an integral part of the tongue for convenience.
- Transport locking bar for security.
- Driveline safety retaining rings for security – Bush Hog Exclusive.
- Perma-Level® hitch always stays level on the tractor drawbar.
– Bush Hog Exclusive.
- Easy-adjust wing turnbuckles save time and effort.
- Deck rings for rough cutting conditions.
Choose the Original
Bush Hog brand rotary grass cutters are famous for their durability. So famous there are many imitations. Don’t be disappointed. Only Bush Hog rotary grass cutters are tough enough to wear the Bush Hog brand. Be sure you buy authentic Bush Hog brand rotary grass cutters...the original and still the toughest.
| 15FT FLEX WING SET-ASIDE GRASS CUTTER SPECIFICATION |
| Models |
2715 |
| Cutting Width |
4.57m (15 ft) |
| Cutting Capacity |
Up to 3 1/2 inch Diameter |
| Cutting Height |
2 to 14 inches |
| Dimensions (width x length) |
15 ft 6 inches x 14 ft 6 inches |
| Transport Width |
2.5m (8'2") |
| HP Requirement |
100hp |
| Deck Thickness |
Top Deck - 11 gauge, Bottom Deck - 10 gauge |
| Side Bands |
1/4 x 12 1/2 inche |
| Gearbox HP |
235 - Transfer, 205 - Center, 205 - Wings |
| PTO Drivelines |
540 PTO, ASAE Cat. 5 C.V. or Cardan/jackshaft
1000 PTO, ASAE Cat. 4, 1 3/8 or 1 3/4 CV or Cardan/jackshaft |
| Wing Drivelines |
ASAE cat 4 with slipclutch |
| Wing Flex |
90° up to 22° down |
| Blades |
1/2-inch x 4-inch |
| Blade Tip Speed |
16,000 ft/min |
| Blade Holder |
Round |
| Tires |
Foam Filled Aircraft Tire |
| Front and Rear Deflectors |
Standard chain shielding |
| Approximate Weight |
2672kg |
| Hitch Type |
Self-Leveling with Perma-Level Hitch |
| Wheel Shock Protection |
Independent springs on each axle |
| Warranty |
1 year limited warranty, 6 year gearbox limited warrenty |
| 15FT FLEX WING SET-ASIDE GRASS CUTTER PRICE |
| Model No. |
Transport Width |
Cutting Width |
HP Requirement |
Weight |
Price |
| 042715 |
2.5m (8'2") |
4.57m (15') |
100 |
2672 kg |
£19620 |
| NB: Carriage Charge |
£160 |