Reduces horsepower requirement and minimises surface disturbance.  Only the central leg is fixed, all the others can be moved along the frame to provide the required spacing to suit the job in hand, this of course means it can also be set for tramline loosening with some subsoiler legs removed.

“Hammer Thru” quick change subsoiler shear bolt system protects the machine in tough, stony conditions and means minimum down time for the operator.  Alternatively there is a hydraulic reset version for extremely stony conditions.

The Subsoilers Hydraulic Depth Control is a useful feature making it easy for the operator to alter the working depth - for example, to work the machine deeper up the tramlines or in habitually waterlogged areas. It also simplifies the job of hitching and unhitching the subsoilers from the tractor.

HEVA Subsoilers quick change bolt on point:  The single piece winged hardox point lifts, cracks and fissures at depth without huge power requirement and can be replaced quickly as it is attached by a single bolt. The standard point is 200mm wide with a 350mm option for different applications.

The standard point has a 200mm wide wing whilst a wider 350mm wing is available for different applications.

Bolt on points using a single bolt are quickly replaced keeping down time to a minimum.

Till-seeding is proving a very effective, low cost method of rape establishment and the subsoiler is an important part of many till seeding systems, hence a fitting kit is available for all models to allow the OPICO Variocast to be mounted