OPICO Products

HEVA Products

Grain Dryers Grassland Equipment

Earth Drills

Cultivation Equipment

Fertiliser Application

Grass Harrow Grass Master Grass Harrow Sward Lifter Grassland Subsoiler Sward Slitter Air Seeder

Bush Hog Rotary Cutters

Air 8 Air 16 Variocast 8 Or 16

3 Point Linkage Post Hole Diggers

Hydraulic Post Hole Diggers

The Farm Range G20/G40 Contractors Range F8

Hydraulic 8300 Industrial Range 8900

Comb Harrow Vari Tilth Vari Disc Duo Vair Disc Quad Prisma Roller For Vari Disc Variocast Seeders Front Linkage Dual Wheel Accessories

Disc Roller Cambridge Rolls Sabre Seeder Grain Drill Fanterra Seed Drill Front Linkage Shatta Board Subsoilers Grass Roller Front Presses

Combi Lift

Cultipakker Front Pakker V Profile Press

Front Linkage And PTO Design


Fixed Arm Position	Semi-Floating Arm Position Block Turned	Fully-Floating Arm Position Block Removed	Vertical Folding System VFS Allows Link Arms To Be Folded Back Out Of The Way When Not In Use
		Eccentric Block

Arms In Rigid Position

Semi-Floating Position Allows the 2 arms limited float, approximately 50mm of individual movement

Floating Position Allows the 2 arms to float independently
"VFS" Vertical Folding System Folds back out of the way when not in use Top link stored on Linkage when not in use

Folded Position Folding pin clamps arm into position
		Folding pin in storage
Close Coupled Minimum projection from the front of the tractor

Standard Cat II Arm Spacing On models up to 3.6 ton

Half Shaft and Arm Solid high quality

Replaceable Half Shaft Bush

Most Linkages Bolt To The Front And The Side Of The Tractor Chassis Giving Maximum Strength

Front Linkage Hydraulics And Any Additional Front Services Required T Into The Rear Spool Block And Can Be Switched On And Off With Tap

Cat II Quick Release Ball Ends On 0.8 To 3.6 Ton Linkages

Sealed Greased Pivot Joint At The Bottom Of The Lift Rams The pivoting ball end inside this joint prevents any twisting force from the implement being applied to the ram that would cause ram seals to fail

5.5 Ton Linkages

5.5 Ton Cat III Ball Ends Cat III / II Balls

5.5 Ton Rigid Position
		5.5 Ton Semi Independent Floating Position

PTO Unit Capable Of Transmitting 200 HP Can Be Fitted To Larger Tractors Integrated Replaceable Oil Filter 2.1:1 Gearing 35mm 6 Spline Shaft Giving 1000 rmp at 2100 Engine Revs "Soft Start" Electro Hydraulic PTO Engagement Prevents Snatching and Damage To Front Implement














	Tractor Front Linkage & PTO Kit Photo Gallery

OPICO Limited
Cherry Holt Road, Bourne
Lincolnshire, PE10 9LA
United Kingdom

Tel: 01778 421111
Fax: 01778 425080

Email: ask@opico.co.uk
Web: www.opico.co.uk

OPICO's policy is one of continuous improvement and the right to change prices, images, pictures, specifications or equipment at any time without prior notice is reserved. Some images on this website may not mach the product being sold, also there may be accessories or optional extras fitted that may not be included with the product.

We are not responsible for " Translate" miss translating or transliterating text on our website.

Front Linkage And PTO Design

Eccentric Block

Arms In Rigid Position

Semi-Floating Position

Floating Position

"VFS" Vertical Folding System

Folded Position

Folding pin in storage

Close Coupled

Standard Cat II Arm Spacing

Half Shaft and Arm

Replaceable Half Shaft Bush

Most Linkages Bolt To The Front And The Side Of The Tractor Chassis Giving Maximum Strength

Front Linkage Hydraulics And Any Additional Front Services Required T Into The Rear Spool Block And Can Be Switched On And Off With Tap

Cat II Quick Release Ball Ends On 0.8 To 3.6 Ton Linkages

Sealed Greased Pivot Joint At The Bottom Of The Lift Rams

5.5 Ton Linkages

5.5 Ton

Cat III Ball Ends

Cat III / II Balls

5.5 Ton

Rigid Position

5.5 Ton

Semi Independent Floating Position

PTO Unit Capable Of Transmitting 200 HP Can Be Fitted To Larger Tractors

Integrated Replaceable Oil Filter

"Soft Start" Electro Hydraulic PTO Engagement Prevents Snatching and Damage To Front Implement