Home OPICO and HEVA Product Range Search OPICO News Parts Contact Us
   
         
   

Grass Roller


   

The HE-VA Grass Roller has all your needs covered.

The Grass Roller or Ballast Roller uses existing HE-VA Rolls technology to solve an increasing problem for today’s grassland farmer and contractor. With farms and fields spread over growing distances and yet needing the same attention from a heavy ballast roll in the spring that they have in the past, the HE-VA Grass Roller combines working widths of 6.3 or 8.2 metres and hydraulic folding for fast, easy transport.

 

Grass Roller Contour following

The frame incorporates HE-VA’s SAT weight transfer system and central pivoting of each section to ensure the water filled sections can adapt to the contours and consolidate the ground as effectively as a single roller.

 

Independant floation and 5 pivot points

Grass Roller

The two centre wing pivots, two folding pivots and the pivoting drawbar eye allow individual sections to follow the contours. Add to this the floating inner links which join the wing sections to the centre rolls section allowing all three ballast roller sections to float completely independently and you have the best possible contour adaption.

1, Ballast roller s without a weight transfer system tend to exert the highest ground
pressure in the centre as the chassis of the rolls, drawbar and wheels are above
the middle roll section.

2, Even with a basic sprung weight transfer system the hinges at the end of the
centre ballast roller section negate much of the transfer effect.

FREE FLOATING BALLAST ROLLER SECTIONS - HE-VA Rolls have free floating roller sections and the SAT weight transfer system which uses hydraulic accumulators and a setting gauge to allow the operator to redistribute additional frame weight from the centre section to the wings ensuring even weight distribution across the full width of the rolls!

SAT SystemThe Grass Roller Hydraulic folding system is linked into two accumulators and a hydraulic pressure gauge. The gauge allows the operator to set the amount of weight transfer dependant on ground conditions and how much water ballast is in the ballast Roller sections. The accumulators act as an oil buffer when the rolls are travelling over uneven ground and the hydraulic rams need to extend or shorten to allow the rolls to follow the contours.

 

Over seed or reseed your grassland

Add an OPICO Air Seeder to the ballast roller and you have a truly multi-purpose HE-VA machine, which can also be used for over seeding and reseeding grassland.

Grass Roller & Seeder

 

Cutlivated Ground

Not only can you use the new Grass Roller to consolidate grassland, it is also ideal for work on cultivated ground. With the addition of the harrowing tines and levelling board, you have a very useful tool on existing grassland or for seedbed preparation.

Ballast Roller

GRASS ROLLER LEVELLING BOARD
When being used on grassland the adjustable spring loaded levelling board can be used to level off mole hills and manure whilst on cultivated ground it can be used for final light levelling of a seedbed.

Ballast Roller Levelling Board

GRASS ROLLER - TWO ROWS OF 12mm TINESThe Tines are good for scarifying grassland, ripping out moss and dead thatch and exposing bare soil when overseeding or final cultivation when working on cultivated ground.

Ballast Roller Tines

GRASS ROLLER - WATER BALLASTABLE 710mm TUBE
The weight of the Grass Roller can be increased by over 70% by filling the Roller Tubes with water as ballast if required, this provides for very effective consolidation on spring grassland or before reseeding cultivated land.

Ready for work in seconds

HE-VA’s clever Rolls folding system allows the operator to fold or unfold the Grass Roller from the tractor seat in seconds using only two spool valves, when folded the wings are effectively locked automatically for road transport.

Grassland Roller Folding

Optional seeder kit provides complete solution

The standard Grass Roller provides effective consolidation for existing grassland or cultivated land ready for seeding, add the optional Levelling board and tines and
you have a useful scarifier and light cultivator. For the complete solution a seeder
mounting bracket and air seeder can be mounted onto the Grass Roller giving you
the option to reseed or overseed grassland, undersow crops and apply other small
seeds where required.

 

Choose from two opico air seeders

OPICO Air 16 Seeder

Mechanical or Electronic OPICO Air 8 seeders fit the 6.3m Grass Roller and are
suitable for overseeding applications, the landwheel giving consistent seed rate
application no matter what working speed the machine is used at.

The OPICO Air 16 Seeder is suitable for either the 6.3m or 8.2m ballast roller s and for
overseeding or reseeding applications at higher seed rates and higher forward
speeds. Suitable for contractors and high output work the Air 16 maximises the daily work rate of a Grass Roller used for seeding.

 

 JANUARY 2010 PRODUCT PRICES
HE-VA Grass Roller Specification & Price
Model No.
Working Width
Transport Width
Weight (excl water)
Weight (inc. water)
Price
1063032-71
6.3m
2.7m
3050
5280
£13273
1063034-71
8.2m
2.7m
3880
6790
£19179

Ballast Roller Accessories
Model No.
Working Width
Description
Weight (kgs)
Price
1063032-51
6.3m
2 Rows Harrow Tines
230
£5974
1063032-52
6.3m
Levelling Bar (for mounting with harrow tines)
140
£1174
1063032-53
6.3m
Seeder Mount Kit (for OPICO Air 8 or Air 16)
75
£2039
1063034-51
8.2m
2 Rows Harrow Tines
280
£7299
1063034-52
8.2m
Levelling Bar (for mounting with harrow tines)
170
£1523
1063034-53
8.2m
Seeder Mount Kit (for OPICO Air 8 or Air 16)
85
£2171
1063098-07
 
Air Brakes
230
£3624
1063098-08
 
Hydraulic Brakes
230
£1413

Top of the Grass Roller | Ballast Roller page



 

 

 

OPICO Logo
 

OPICO Limited
Cherry Holt Road, Bourne
Lincolnshire, PE10 9LA
United Kingdom


Tel:
01778 421111
Fax: 01778 425080


Email: ask@opico.co.uk
Web: www.opico.co.uk 

 
 
         
 
 
    Home | Search | News | Products | Parts | Contact